This is a reference, written by the inventor of the product and is worded in easy to understand language. It includes important and useful information on the evolution of the bearing isolator, including: how and why it was invented; how it works; how and why contact seals fail in a short period of time; how to eliminate catastrophic failure; how to reduce power consumption in rotating equipment; costs; maintenance; configurations and much more.
Rock Island, IL (PRWEB) April 20, 2005 -- Inpro/Seal Company has announced a
revision to its highly successful brochure, “Introduction to Bearing Isolators,
A short lesson in bearing isolation”.
Authored by David C. Orlowski, well known for his knowledge of bearings, bearing protection and tribilogy, the literature is a valuable source of information and useful tool to anyone involved in the management, maintenance, repair and operations (MRO) of motors, machine tool spindles, turbines, fans, gear boxes, paper machine rolls, pumps and other types of rotating equipment used in industrial/process plants.
Authored by Industry Expert
President and founder of Inpro/Seal Company, Orlowski has spent the last 41+ years working on ways to enhance and extend the service life of rotating equipment. In 1977, he received patent protection (#4,022,479) for the bearing isolator. (He also invented the term “bearing isolator” in the process.) In addition, he holds more than 40 other isolator related patents, some of which go out until 2018 and longer.
Importance of Research and Feedback
According to Orlowski, “For over 27 years Inpro/Seal has never stopped developing ways to help companies increase productivity and improve their bottom line. To this end, our manufacturing complex is the largest of its kind in the world devoted to the engineering, research, improvement, testing and manufacture of bearing isolators.”
Orlowski continued, “A very important aspect of our new technologies is direct end user feedback. Last year, we completed a two-year end-user based research project that was conducted on a market-by-market, application-by-application analysis. The end result of this research was that end users wanted to know a lot more about bearing isolators. “
“Whether they used bearing isolators or not, whether or not they read our literature or advertising messages, the majority of the respondents simply stated that they wanted to know more about the basics of the product. As a direct result of this research, we developed a brochure, “Introduction To Bearing Isolators, A short lesson in bearing isolation”.
Orlowski concluded by saying that, “Based on feedback, request and need, we have revised our reference to include additional technical information, artwork and drawings. It represents a major investment on our part to inform end users how bearing isolators eliminate the root cause of rotating and related equipment failure - moisture, dirt and abrasives contaminating the bearing environment.”
What makes this reference unique is that it is written by the inventor of the product in easy to understand language. It includes important and useful information on the evolution of the bearing isolator, including: how and why it was invented; how it works; how and why contact seals fail in a short period of time; how to eliminate catastrophic failure; how to reduce power consumption in rotating equipment; costs; maintenance; configurations and much more.
What is a Bearing Isolator
A bearing isolator is a non-contact, non-wearing, permanent bearing protection device. It has a rotor and a stator, and the two are unitized, so that they don’t separate from one another while in use. Typically, the rotor turns with a rotating shaft, while the stator is pressed into a bearing housing. The two components interact to keep contamination out of the bearing enclosure and the lubricant in.
Inpro/Seal protected bearings have been known to run 150,000 hours (17 years) or more, eliminating the need for continual maintenance and repair. Documented cases show that a plant can easily double the mean-time-between failure (MTBF) and reduce maintenance costs by at least half, with users reporting an extremely high ROI (Return On Investment). Bearing isolators are installed by OEM’s, retrofitted on existing equipment or specified by end users. Approximately 1.6 million have been installed and most are still in operation in process plants around the world.
Recent developments include: the only product that protects rolling element bearings on paper machines from the wet end to the dry end; IEEE-841 motors that use bearing isolators as part of their specification and set the standard for motor bearing protection; the VBX-H Series that protects machine tool spindle bearings from coolant, chips, humidity and heat; the OM 32 that optimizes oil mist applications by eliminating stray emissions, environmental and housekeeping issues; and the Air Mizer™- PS, a dry sealing system provides a positive seal in applications where dry particulates, powders and bulk solids are handled, processed, packaged and stored.
Inpro/Seal Company is the originator and the number one manufacturer of bearing isolators, used to protect motor and pump bearings, machine tool spindles, turbines, fans, gear boxes, paper machine rolls and many other types of rotating equipment. Additional applications include the handling, processing, packing and storage of dry particulates, powders and bulk solids.
As the recognized global leader in bearing isolator technology, Inpro products are marketed to the petroleum, refining, nuclear, power generation, metalworking, food processing, grain processing, chemical, water, wastewater treatment, metalworking, automotive, hydrocarbon processing, HVAC, pulp and paper, mining, mineral, ore processing and general industrial markets around the world.
To receive a copy of – “Introduction to Bearing Isolators”, contact: Inpro/Seal Company, P.O. Box 3940, Rock Island, Illinois 61204. Phone numbers are: (800) 447-0524 or (309) 787-4971. Fax number is: (309) 787-6114. Website: www.inpro-seal.com or www.bearingisolators.com
The Mark Baker Company
4124 Quebec Avenue N
Minneapolis, MN 55427
Mark Baker (763) 537-7540
P.O. Box 3940
Rock Island, IL 61204
David C. Orlowski
# # #
Source : http://www.prweb.com/releases/2005/4/prweb230445.htm